Datsun 510 1600 coupe rubber seals
click Blue part# for more info
part# |
description |
price |
|
| BSR1671 | Front windscreen moulded seal takes wide original stainless moulding
|
$ |
187 |
| BSR1672 | Rear windscreen moulded seal takes wide original stainless moulding | $ |
168 |
| BSR1681 | Front windscreen moulded seal NO stainless moulding smooth type | $ |
157 |
| BSR1682 | Rear windscreen moulded seal NO stainless moulding smooth type | $ |
138 |
| BSR1673 | Front door weather strip, this is the main door seal, fits RH LH doors, each
|
$ |
|
| BSR1605 | Boot or trunk weather strip , this is the main boot/trunk seal |
$ |
52 |
| BSR1606 | Rear bumper splash seal, fits the rear body panel join between bumper & body |
$ |
19 |
| BSR1607 | Bonnet or hood to firewall seal, this one stops water getting in the fuse box
|
$ |
19 |
| BSR1611 | Front door glass baily channel, the window glass runs in this, fits RH LH, each
|
$ |
28 |
| BSR1674 | Front door outer window belt seal, fits on the stainless moulding fits RH LH,each
|
$ |
|
| BSR1675 | Front door inner window belt seal, fits on the inner side of the door RH LH, each
|
$ |
|
| BSR1676 | Rear butterfly window pinch weld, | ||
| BSR1678 | Rear butterfly window frame to body weather strip | ||
| BSR1620 | Front door pinch weld ,long, to go completely around the door frame if kick panels are not used, trim to size as required RH LH, each |
$ |
25 |
| BBS1631 | Bonnet or hood bump stops, supports the bonnet or hood, full kit
|
$ |
12 |
| BBS1632 | Fuel filler flap bump stops pair |
$ |
3 |
| BBS1633 | Boot or trunk lid bump stop kit pair |
$ |
12 |
| DLR1600 | Door latch anti rattle rubber,for door latch mechanism , genuine unlisted part | $ |
10 |
| EFS1601 | Fuel filler tube genuine part |
$ |
108 |
| TCB1200 | Gear lever boot genuine part for conversions |
$ |
29 |
| BFR1625 | Replacement rubber for bumper over rider SSS each | $ |
59 |