Wilwood brake proportioning valve mount kit HWL1618

Adustable rear brake bias valve line & mount kit

This fixed line kit permits the wilwood valve to be mounted on the strut tower immediately below the brake master cylinder.
Utilising an existing threaded mounting on the 510 strut tower aligns the valve neatly as if it was factory fitted.
Cap screws are stainless steel. Kit also includes a brake flare nut for attaching to rear brake line ( not pictured)

Use with HWV1618 proportioning valve

180B engine mountings

 

Note! The looped fixed line is to allow some freedom of fitting & to allow some flex to prevent
fractures in the line due to flexing of the vehicle firewall under high pedal pressure.