Datsun 510 1600 rear brake brackets

Laser cut brackets for mounting R31 skyline calipers to 1600 rear trailing arms. supplied in matching pairs
The brackets are virtually self jigging and need to be welded to the flange on the trailing arm.
Clean off the dags on the trailing arm & bolt the brackets to the arm.
Check for alignment to the rotor & weld on.
Whilst the brackets can be welded to the arms with bearings in situ welding must be carried out in stages to prevent overheating the bearings & seals.
It is preferred that bearings and seals be replaced as after 30 years or so they are getting very tired.

Note! All welding must be done by a professional welder.